All-Region DVD and Blu-ray Player Advice

Discuss internationally-released DVDs, Blu-rays, and UHDs and related topics
Post Reply
Message
Author
User avatar
barryconvex
billy..biff..scooter....tommy
Joined: Sat Aug 25, 2012 2:08 am
Location: NYC

Re: All-Region DVD and Blu-ray Player Advice

#901 Post by barryconvex »

thank you everyone who replied. i'm going to try the LG BP220 because they have them in stock at the best buy down the street. can anyone confirm that the hack on these models is simple and won't have to be performed every time i want to switch regions? i have yet to buy a blu ray disc so i'm not that concerned with switching zones...yet. this is strictly to watch my region 2 dvds...again thank yous in advance...
User avatar
Michael Kerpan
Spelling Bee Champeen
Joined: Wed Nov 03, 2004 5:20 pm
Location: New England
Contact:

Re: All-Region DVD and Blu-ray Player Advice

#902 Post by Michael Kerpan »

A standard American version of LG BP220 apparently won't do PAL to NTSC conversion. See: http://forum.videohelp.com/threads/3464 ... ions/page2" onclick="window.open(this.href);return false;
User avatar
Koukol
Joined: Fri Jan 18, 2013 12:31 am

Re: All-Region DVD and Blu-ray Player Advice

#903 Post by Koukol »

barryconvex wrote:thank you everyone who replied. i'm going to try the LG BP220 because they have them in stock at the best buy down the street. can anyone confirm that the hack on these models is simple and won't have to be performed every time i want to switch regions? i have yet to buy a blu ray disc so i'm not that concerned with switching zones...yet. this is strictly to watch my region 2 dvds...again thank yous in advance...


"Expense is not a factor" and you're going for a LG? ](*,)
User avatar
barryconvex
billy..biff..scooter....tommy
Joined: Sat Aug 25, 2012 2:08 am
Location: NYC

Re: All-Region DVD and Blu-ray Player Advice

#904 Post by barryconvex »

expense wasn't a factor until i mentioned it to my wife...sorry,i should've edited that post. is there a blu ray player for less than $100 that will play my region 2 dvds with a single hack?
User avatar
perkizitore
Joined: Thu Jul 10, 2008 7:29 pm
Location: OOP is the only answer

Re: All-Region DVD and Blu-ray Player Advice

#905 Post by perkizitore »

Most blu-ray players can play Region Free for DVDs by setting the DVD Region to 0. However, as I mentioned before get either the Toshiba BDX1200 or the 3200 for a cheap, reliable and hassle free player.
User avatar
barryconvex
billy..biff..scooter....tommy
Joined: Sat Aug 25, 2012 2:08 am
Location: NYC

Re: All-Region DVD and Blu-ray Player Advice

#906 Post by barryconvex »

why is there such a difference in price on the LG models that are region free on bombay electronics as opposed to amazon? i saw that LG model here:
If you're interested in splurging and getting a region free one (hardware hacked - works wonderfully and you can still update the firmware while retaining the region switching capability), you can get one here (where I got mine) for $190 shipped using the coupon code BARGAINOFFERS. They throw in a free HDMI cable, too.
then checked best buy and they have the same model for $100 cheaper...
User avatar
perkizitore
Joined: Thu Jul 10, 2008 7:29 pm
Location: OOP is the only answer

Re: All-Region DVD and Blu-ray Player Advice

#907 Post by perkizitore »

These are hardware modded, so the charge you for the chip and installation. That makes them future proof to any problems compared to region free players unlocked by firmware.
User avatar
barryconvex
billy..biff..scooter....tommy
Joined: Sat Aug 25, 2012 2:08 am
Location: NYC

Re: All-Region DVD and Blu-ray Player Advice

#908 Post by barryconvex »

ok,thank you...as you can see,i'm way out of my depth here...i really wish philips still made the dvp 5982...love that player...i'm going to take your advice perk and go with the toshiba..
User avatar
manicsounds
Joined: Wed Nov 03, 2004 2:58 am
Location: Tokyo, Japan

Re: All-Region DVD and Blu-ray Player Advice

#909 Post by manicsounds »

The Insignia player I have is tricky with DVD regions. I can obviously change the region to whatever, including a 'region free' option, but if I put in a region 3 disc on that setting, it won't play. Why? Because the 'region free' DVD setting on the Insignia means the disc itself must be region free. If I want to play a region 3 disc, I must set it to region 3. Region 2, Region 2. Not a big problem really. It's about as much hassle as entering the "Down, R, Up, L, Y, B" code.
User avatar
Emak-Bakia
Joined: Tue Apr 26, 2011 3:48 pm

Re: All-Region DVD and Blu-ray Player Advice

#910 Post by Emak-Bakia »

A heads up for anyone looking for an inexpensive, region free blu ray player: the Seiki 212S currently available at Sears is made region free simply by entering “Setup > 8520” at the menu screen. I bought one a few months ago after my Insignia bit the dust, and haven’t had any problems with it so far. It’s a very basic player without wireless, but that just happens to be perfect for my current setup.

The only real problem is that the remote is one of the most poorly designed, unresponsive controls I’ve ever handled. But with a $49.99 price tag, it will do until I can afford to buy a better quality region free player. Word is, though, that these models have been discontinued and they’re already out of stock at other outlets, so I'd suggest acting quickly.
twicebilled
Joined: Fri May 17, 2013 10:17 pm

Re: All-Region DVD and Blu-ray Player Advice

#911 Post by twicebilled »

Emak-Bakia wrote:The only real problem is that the remote is one of the most poorly designed, unresponsive controls I’ve ever handled. But with a $49.99 price tag, it will do until I can afford to buy a better quality region free player. Word is, though, that these models have been discontinued and they’re already out of stock at other outlets, so I'd suggest acting quickly.
I use this player as an all region player and haven't had an issue yet with it playing anything. Also I had the same issue with the remote until I switched out the batteries, its still not as responsive but I felt the batteries shipped drained.
User avatar
Michael Kerpan
Spelling Bee Champeen
Joined: Wed Nov 03, 2004 5:20 pm
Location: New England
Contact:

Re: All-Region DVD and Blu-ray Player Advice

#912 Post by Michael Kerpan »

How does this do with PAL to NTSC conversion (for DVDs -- and sometimes extra content on Blu-Rays)?
twicebilled
Joined: Fri May 17, 2013 10:17 pm

Re: All-Region DVD and Blu-ray Player Advice

#913 Post by twicebilled »

Michael Kerpan wrote:How does this do with PAL to NTSC conversion (for DVDs -- and sometimes extra content on Blu-Rays)?
It upscales all DVD content so PAL isn't an issue I believe similar to watching blu-rays. The upconverter is not bad for $49.99... but then again you are only paying $50 for a region free player.
Zot!
Joined: Wed Jan 20, 2010 4:09 am

Re: All-Region DVD and Blu-ray Player Advice

#914 Post by Zot! »

twicebilled wrote:
Michael Kerpan wrote:How does this do with PAL to NTSC conversion (for DVDs -- and sometimes extra content on Blu-Rays)?
It upscales all DVD content so PAL isn't an issue I believe similar to watching blu-rays. The upconverter is not bad for $49.99... but then again you are only paying $50 for a region free player.
Upscaling wouldn't necessarily be enough for PAL content, as it runs at a different frame rate, but as you are having no problems, it sounds like it is doing it without you being aware.
User avatar
Emak-Bakia
Joined: Tue Apr 26, 2011 3:48 pm

Re: All-Region DVD and Blu-ray Player Advice

#915 Post by Emak-Bakia »

I've watched several PAL discs and I noticed no problems with the conversion to NTSC. Admittedly, my eyes for this sort of thing aren't the sharpest, but there was never an instance of any obvious glitches.
User avatar
cdnchris
Site Admin
Joined: Tue Nov 02, 2004 6:45 pm
Location: Washington
Contact:

Re: All-Region DVD and Blu-ray Player Advice

#916 Post by cdnchris »

I'm just going to throw in some praise for this player. I've been looking for another player (cheap preferably) and once I saw the post about the one at Sears I picked one up. I hooked it up and it works beautifully. Changed it to play Region B and it of course plays without issue. Picture and sound both appear to be fine.

The default for DVD is 0. I threw in BFI's The Devils and I didn't notice any issue with the PAL to NTSC conversion. You really can't tell. Checking out a few DVDs upscaling is decent, not great, but fine enough. I'm sure it will break in a year, but it's a bargain at $50.

(Remote is spotty, though. Only real complaint.)
User avatar
matrixschmatrix
Joined: Wed May 26, 2010 3:26 am

Re: All-Region DVD and Blu-ray Player Advice

#917 Post by matrixschmatrix »

I just got mine, and after changing the region code, I popped in the MoC Metropolis disc and it played with no trouble. It came preprogrammed to show everything in 480 for some reason, but that was an east enough fix (though it had me worried for a bit, as everything seemed blocky and unimpressive looking)
User avatar
cdnchris
Site Admin
Joined: Tue Nov 02, 2004 6:45 pm
Location: Washington
Contact:

Re: All-Region DVD and Blu-ray Player Advice

#918 Post by cdnchris »

Oh yeah, mine was like thay too. Oddly it comes set up to be hooked up to a CRT as the default. Had to change every default but didn't take long.
User avatar
rrot
Joined: Tue Feb 26, 2013 11:41 pm

Re: All-Region DVD and Blu-ray Player Advice

#919 Post by rrot »

And it [the Seiki SR212S blu ray player] is now gone from Sears online...and just about everywhere else too it seems.
User avatar
jindianajonz
Jindiana Jonz Abrams
Joined: Thu Oct 13, 2011 12:11 am

Re: All-Region DVD and Blu-ray Player Advice

#920 Post by jindianajonz »

So now that I seem to have missed out on the Seiki, what are some other good, cheap, easy-to-setup region free players that are still available?
User avatar
cpetrizzi
Joined: Tue Oct 09, 2012 1:26 pm

Re: MoC Blu-ray/DVD Combos

#921 Post by cpetrizzi »

What type of multi-region blu-ray players do you guys have? Is this a decent one?
Last edited by cpetrizzi on Wed Jul 24, 2013 11:36 am, edited 1 time in total.
User avatar
cdnchris
Site Admin
Joined: Tue Nov 02, 2004 6:45 pm
Location: Washington
Contact:

Re: All-Region DVD and Blu-ray Player Advice

#922 Post by cdnchris »

If I'm reading this page right, you might be able to find reconditioned Seiki players here: http://www.searsoutlet.com/Blu-ray-Play ... uyUsedOnly (Of course, I think they're only "store pickup")
David M.
Joined: Sat May 10, 2008 5:10 pm

Re: All-Region DVD and Blu-ray Player Advice

#923 Post by David M. »

I really hope those Seiki players do a good job of reproducing what's on the disc given how many people in the US are using them!
Zot!
Joined: Wed Jan 20, 2010 4:09 am

Re: All-Region DVD and Blu-ray Player Advice

#924 Post by Zot! »

David M. wrote:I really hope those Seiki players do a good job of reproducing what's on the disc given how many people in the US are using them!
Is there really that much of a difference between players when you're outputing an all digital stream?
rrenault
Joined: Wed Nov 17, 2010 7:49 pm

Re: All-Region DVD and Blu-ray Player Advice

#925 Post by rrenault »

I'm wondering, I purchased AnyDVD a few months back but only paid for two years worth of updates. Do you think there'd be a way to change it so I could get lifetime updates (i.e. calling them and asking if I could pay a little extra on top of what I already paid)?
Post Reply